What Crane Do I Need for My Job?

Cranes For Road Construction

When it comes to your project, crane size and type matters. You can’t just choose any old crane to complete your project. There are a variety of different cranes in different sizes, including tower, crawler, all terrain, and boom trucks. The type and size of your project, as well as the condition of your site plays a major role in choosing the right crane for the job.


Weight Requirements

Before you can choose the right crane for the job, you should have a clear understanding of how much you’ll need to lift and haul. You can easily narrow down your list of options once you know how much weight you’ll need to lift. Load charts will help you understand all you need to know about the crane, from its capabilities to its structure and dimensions. This includes boom length and weight capacity. You’ll need to determine gross capacity and calculate maximum lift within a given radius. Calculating these numbers will ensure that you choose a crane that has enough capacity and will fit in your job site.



Next, you need to figure out how the crane is getting to your jobsite. Some cranes are mobile and some may need to be hauled on a trailer. You may overlook this detail, but it’s a critical one. You must consider that there are city and state laws requiring permits to transport cranes and heavy equipment. In order to get the crane to your site, you may have to go through hoops to avoid roads that are insufficient in allowing heavy equipment to pass through. At Landwehr Construction, we offer a crane taxiing service; we will bring the crane to you to make the process easier for you.



Before you make your final decision, you need to think about what your construction site looks like. Consider both its condition and terrain. This includes weather and spatial constraints. Is the ground level? Does it rain in the area all the time? Is there minimal space? When you take these factors into consideration, you’ll be able to decide between a rough terrain crane, an all-terrain crane, a mini-crane, or something else entirely.



At Landwehr Construction, we have a fleet of over 30 cranes, including the powerhouse AC 350 designed for all terrains. We can lift from 30 to 400 tons and our boom/jib lengths reach up to 415 feet. Contact us for more information.

Environmental Remediation

When doing a site assessment, a contractor may notice that there are contaminants within the earth, whether that’s the soil or sediment, or the surface water or groundwater. Part of a contractor’s job is to help protect human health and help to restore the environment—or at the very least, avoid contaminating it further. Environmental remediation consists of removing this pollution to avoid the spread of contaminants to surrounding communities and the threat to public health.


Taking care of the environment now is a way to sustain it for future generations. That’s why environmental remediation is so important. And it’s not just important for the environment, but for the people in surrounding communities. If groundwater is contaminated, that can have serious consequences for residents in the area.


There are a variety of methods for cleaning up chemical or toxic spills and oftentimes it’s dependent upon the contaminant and the site itself. There is typically no quick solution. Remediation technologies are categorized into ex-situ and in-situ methods. Ex-situ consists of excavating contaminated soil and removing contaminated water, and then treating the surface. On the other hand, in-situ methods aim to treat the soil or water without removing it. Examples of ex-situ methods include the disposal of affected soil to a landfill and pumping and treating the water. In-situ methods include solidification and stabilization, soil vapor extraction, permeable reactive barriers, monitored natural attenuation, bioremediation-phytoremediation, chemical oxidation, steam-enhanced extraction, and thermal desorption.


The solution must a be a safe one that does not cause more harm to the site itself. For instance, one of the methods for environmental remediation involving increased radiation levels consists of evacuation or site isolation. If the site naturally has higher radiation levels, evacuating it may do more harm than good by ruining an ecosystem.


Environmental remediation is typically subject to a number of regulatory requirements. At Landwehr Construction, we work closely with the appropriate regulatory agencies to make sure your project is done right and done safely and efficiently.

Beginning Your Next Excavation Project

Are you ready to begin your next excavation project? Perhaps you are building a house or a new building for your business, or you’d like to build a basement or a multi-layered parking lot. There are necessary precautions that need to be accounted for before you start your excavation project.



It’s important you time your excavation project properly so that you don’t do it too soon in the season or too late. It all depends on how cold the ground is. Most individuals reserve their excavation projects for summer or late spring at the earliest. During the fall, the ground begins to freeze. Winter is out of the question. It can be a bad idea to complete an excavation project when the ground is cold, because the ground is harder and digging is especially difficult.


If your project can’t wait, there are some specific methods you can try, such as hydro-excavation. This process utilizes high pressure water to dig through frozen soil.


Check your Surroundings

You can’t simply start excavating; you have to check your surroundings first. You will need to speak directly to utility operators to ensure that your excavation project doesn’t hit or damage utility lines. Before you begin, you’ll want to mark where underground utilities run. You should also pay attention to where your trees, plants, and other shrubs have planted roots. You could be in for quite the project if you hit a tree root that has been growing for decades.


Avoid Cave-Ins

There are regulations you must follow depending on how far you dig. You need an exit in case of a cave-in. Cave-ins can happen because of the soil quality and weather conditions. They can also happen if excavation equipment is too close to the edge.

Leave it to the Experts

If you are concerned about taking an excavation project on yourself, it’s best to call in the experts. Landwehr Construction can take care of the entire process from start to finish. We can manage the estimating, budgeting, and project management process entirely in-house. Our employees are certified and highly skilled. We’d love to be your one-stop contractor.

Investing in Renewable Energy

Renewable energy is immensely important, especially with the position our world is in today. Renewable energy comes from abundant, natural resources. These resources replenish themselves over a period of time, and they do not deplete the earth’s resources like non-renewable energy (coal, nuclear, etc). Landwehr Construction is proud to drive clean energy. Renewable energy is not only beneficial for our climate, it is good for our health and our economy.


Did you know that electricity is the number source of greenhouse gases? Combine the greenhouse gases produced from driving and flying, and electricity still produces more greenhouse gases. Investing in renewable energy is one of the best ways you can reduce your environmental footprint. Clean energy has countless benefits, including:


  • Reduction in smog
  • Reduction in toxic buildups
  • Lowers the impact of coal mining and gas extraction


There are countless ways you can lower your carbon footprint. For starters, you should begin by reducing your electricity usage. One of the best ways to do that is by being mindful of how much energy you may be wasting. You should also use energy efficient lighting. The investment in renewable energy is the next step. There are several forms of renewable energy sources. We can garner energy from the sun, wind, and thermal energy within the earth’s core. The best part is that these renewable sources do little, if any, damage to the environment—unlike their nonrenewable counterparts.


Landwehr Construction is a member of The Minnesota Solar Energy Industries Association (MnSEIA). Solar energy doesn’t product any pollution and it is one of the most affordable forms of renewable electricity resources. Many households are taking advantage of it because it is affordable and planet-friendly. Not only that, but solar energy is a low-maintenance solution. With no moving points that need to be broken down, you won’t have to worry about maintenance costs.


Our team is happy to consult with you about taking advantage of solar energy. We can operate anywhere in the United States to bring solar energy to you and continue the drive toward clean energy for everyone. With a heavier reliance on clean energy, we won’t need to rely on nonrenewable sources that contribute to a deteriorating environment.


What is Crane Taxiing?

Working on a big project? Then you need all the help you can get. Chances are you don’t have a crane lying around, so you’re going to need to call for help. Thankfully, there are a few different crane taxiing solutions to get your project up and running.


Think of crane taxiing just as you would if you were to call an Uber. Order an Uber, and a driver shows up and takes you where you want to go. Call up Landwehr Construction Inc., and we will transport the crane and a crew of experts to you to get your project completed efficiently and to your precise expectations.


There are also all-terrain cranes available with a compact design that are ready to travel all across the United States. They don’t need to be loaded onto any equipment. They are configured to travel to the jobsite themselves, without the assistance of transportation equipment (including counterweight and jibs). This is an extremely efficient way to complete minor projects. The crane taxi can complete numerous jobs in one day. Due to their compact design, they can easily navigate a jobsite and quickly perform lifts.


The upfront costs for a crane can be off-putting for a business that only plans to use it once. A normal crane may only cost between $15,000 and $20,000, but specialty cranes can cost upwards of $500,000. If you aren’t using the crane frequently, you will be losing money. It is far more advantageous to rent a crane for your one-time use, along with a crew that will complete the project. Additionally, you may require a specialty crane that few companies possess. This makes crane taxiing a better option than buying or leasing. Renting a crane and having it taxied to you allows you to focus more of your time and resources on the project at hand, rather than how much money you could be losing by purchasing a crane.


At Landwehr Construction, we offer a variety of crane and rigging solutions, from 30 to 400 tons. Contact us to learn more.

PPE on Construction Sites

Nowadays, you can’t go very long without hearing someone talking about masks or gloves. Personal protective equipment (PPE) is important in the medical field and during the COVID-19 pandemic, sure, but it is also crucial in several other industries. According to the Occupational Safety and Health Administration (OSHA), all construction workers need to be wearing the proper protective equipment before they are able to begin working.


Safety Glasses

It is of the utmost importance that anyone working in an operation where objects can fly into the face and eyes wear either safety glasses, a face shield, or another form of PPE specific to the industry. This includes anyone working with electrical hazards, harmful chemicals, or concrete. Those welding, cutting, and grinding may also encounter foreign objects that they need to protect themselves from.


Hard Hat

Just as you need to wear safety glasses to protect yourself from flying objects, you need to protect your head from falling objects. A hardhat will also protect you if you fall or if your head comes into contact with an electrical hazard. Be sure your hard hat is in good condition. If it begins to deteriorate, it’s time to replace it.


Hearing Protection

Working in the construction industry, you subject yourself to loud machinery. You must take precautions when working in loud conditions by wearing frequently cleaned earplugs or earmuffs. Your preference for plugs or muffs is dependent on not only your industry, but which one you will be most comfortable in and therefore more likely to wear.



Keep your hands safe with snug-fitting gloves. The material of the gloves you wear depends on the type of construction working you are doing.


Work Boots

You want to wear comfortable safety-toed work boots that are slip-resistant. The soles should be puncture-resistant. This will prevent your toes and feet from being crushed by any falling objects.


This is a list of the most basic PPE. Depending on what you are working on, you may require respiratory PPE, fall protection equipment, fire resistant clothing, and more. Not only is it important that you are always wearing this equipment on the job (and any other safety equipment your employer requires), but you also need to be maintaining it. If you notice wear and tear on your PPE, it’s time to replace it. It cannot do its job if it’s not in proper condition.

Gregory Fietek

It’s With a Very Heavy Heart We Share This News

Greg Fietek passed away peacefully Saturday evening with his family by his side. Greg was diagnosed with stage IV lung cancer in early September. He gave it his all, but the cancer proved to be too advanced. Greg began with Landwehr in 1975, at the age of 20. He wore many hats through the years, and will be greatly missed.

Funeral Service

Funeral Services for Greg will be this Thursday, November 14th at Shelley Funeral Chapel in Little Falls. Visitation will be from 9:00 AM to 11:00 AM with service at 11:00 AM.

A lunch will follow at the Falls Ballroom in Little Falls.

Obituary For Gregory “Greg” Fietek